SNMP Reference Guide

Storage Management Group 499
Array Disk Vendor
Array Disk State
Name arrayDiskVendor
Object ID 1.3.6.1.4.1.674.10893.1.20.130.4.1.3
Description The array disk's manufacturer's name.
Syntax DisplayString
Access Read-only
Name arrayDiskState
Object ID 1.3.6.1.4.1.674.10893.1.20.130.4.1.4
Description Identifies the current state of the array disk. Possible states:
0: Unknown
1: Ready - Available for use, but no RAID configuration has been assigned.
2: Failed - Not operational.
3: Online - Operational. RAID configuration has been assigned.
4: Offline - The drive is not available to the RAID controller.
6: Degraded - Refers to a fault-tolerant array/virtual disk that has a failed disk.
7: Recovering - Refers to state of recovering from bad blocks on disks.
11: Removed - Indicates that array disk has been removed.
15: Resynching - Indicates one of the following types of disk operations:
Transform Type, Reconfiguration, and Check Consistency.
24: Rebuild
25: No Media - CD-ROM or removable disk has no media.
26: Formatting - In the process of formatting.
28: Diagnostics - Diagnostics are running.
34: Predictive Failure
35: Initializing: Applies only to virtual disks on PowerEdge™ RAID Controller
(PERC), PERC 2/SC, and PERC 2/DC controllers.
39: Foreign
40: Clear
41: Unsupported
53: Incompatible
Syntax Integer
Access Read-only