SNMP Reference Guide

Memory Group 289
Memory Group
The Memory Group provides information about the physical memory in your system. Variables in
this group include error correction type, location, and different types of memory use, such as cache,
flash, system, video, and nonvolatile memory.
Physical Memory Tables
The following management information base (MIB) tables define the objects in the Memory Group:
• Physical Memory Array Table
• Physical Memory Array Mapped Table
• Physical Memory Configuration Table
• Physical Memory Logging Table
• Redundant Memory Unit Table
• Physical Memory Card Table
Physical Memory Array Table
The physical memory array is the entire physical memory of a system. The example that follows
shows variable values for a system that has one 128-megabyte (MB) dual in-line memory
module (DIMM):
• physicalMemoryArrayMaximumSize = 2,097,152 kilobytes (KB) or 2 gigabytes (GB)
• physicalMemoryArrayTotalNumberSockets = 4 (the example system has four DIMM slots on
the motherboard)
• physicalMemoryArrayInUseNumberSockets = 1 (there is only one DIMM installed)
The following object sets up the Physical Memory Array Table:
Name physicalMemoryArrayTable
Object ID 1.3.6.1.4.1.674.10892.1.1300.10
Description Defines the Physical Memory Array Table.
Syntax PhysicalMemoryArrayTableEntry
Access Not accessible