Messages Reference Guide

84 Storage Management Message Reference
2155 Minimum
temperature probe
warning threshold
value changed
Ok / Normal Cause: This alert is for informational purposes.
A user has changed the value for the
minimum temperature probe warning
threshold.
Action: None
None 1051
2156 Controller alarm has
been tested
Ok / Normal Cause: This alert is for informational purposes.
The controller alarm test has run successfully.
Action: None
None 751
2157 Controller
configuration has
been reset
Ok / Normal Cause: This alert is for informational purposes.
A user has reset the controller configuration.
See the online help for more information.
Action: None
None 751
2158 Physical disk online Ok / Normal Cause: This alert is for informational purposes.
An offline physical disk has been made
online.
Action: None
Clear
event
901
2159 Virtual disk renamed Ok / Normal Cause: This alert is for informational purposes.
A user has renamed a virtual disk.
When renaming a virtual disk on a PERC
3/SC, 3/DCL, 3/DC, 3/QC, 4/SC, 4/DC,
4e/DC, 4/Di, CERC ATA100/4ch, PERC 5/E,
PERC 5/i or SAS 5/iR controller, this alert
displays the new virtual disk name.
On the PERC 3/SC, 3/DCL, 3/DC, 3/QC,
4/SC, 4/DC, 4e/DC, 4/Di, 4/IM, 4e/Si, 4e/Di,
and CERC ATA 100/4ch controllers, this alert
displays the original virtual disk name.
Action: None
None 1201
2162 Communication
regained
Ok / Normal Cause: This alert is for informational purposes.
Communication with an enclosure has been
restored.
Action: None
Clear
event
851
2163 Rebuild completed
with errors
Critical /
Failure /
Error
Cause: This alert is documented in the Storage
Management online help.
Action: See the online help for more
information.
None 904
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Clear
Event
Number
SNMP
Trap
Numbers