CIM Reference Guide

24 CIM_PhysicalElement
CIM_Slot
The CIM_Slot class described in Table 2-11 represents connectors into which packages are inserted.
For example, a physical package that is a hard drive can be inserted into a small computer system
interface-single connector attachment (SCSI-SCA) slot. As another example, a card can be inserted
into a 16-, 32-, or 64-bit expansion slot on a host board.
Table 2-11. CIM_Slot Properties
Class Name: class CIM_Slot
Parent Class: CIM_PhysicalConnector
Property Description Data Type
ConnectorType See Table 2-10 uint16
SupportsHotPlug Indicates whether the slot supports hot-plug adapter cards. Boolean
MaxDataWidth Indicates the maximum bus width in bits of adapter cards that can be
inserted into this slot. Values for the MaxDataWidth property are as
follows:
0 Unknown
1 Other
8 Bits
16 Bits
32 Bits
64 Bits
128 Bits
uint16
CIM_ ManagedSystemElement
CIM_PhysicalElement
CIM_ ManagedSystemElement
CIM_PhysicalElement
CIM_PhysicalConnector
CIM_Slot