Users Guide
Table Of Contents
- User’s Guide
- Contents
- Introduction
- What’s New for Version 5.1
- Setup and Administration
- Installing Server Administrator
- Using Server Administrator
- Instrumentation Service
- Remote Access Service
- Overview
- Hardware Prerequisites
- Software Prerequisites
- Adding and Configuring DRAC Users
- Configuring an Existing DRAC User
- Configuring the DRAC Network Properties
- Configuring the DRAC Alert Properties
- Configuring DRAC III Dial-in (PPP) Users and Modem Settings
- Configuring the DRAC Remote Features Properties
- Configuring DRAC Security
- Accessing and Using a Dell Remote Access Controller
- Working With the Baseboard Management Controller (BMC)
- Storage Management Service
- Server Administrator Logs
- Troubleshooting
- Glossary
- Index
Instrumentation Service 75
Physical Disks
Clicking the Physical Disks object allows you to view information about the physical disks attached to
the enclosure or backplane. The Physical Disks object action window can have the following tab,
depending on the user’s group privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the physical disks attached to the enclosure or backplane. The status is visually indicated with the icons
described in "Storage Component Severity."
Property information includes name, state, capacity, used and available disk space, and other
information. You can also execute physical disk tasks in this tab.
EMMs
Clicking the EMMs object allows you to view information about the Enclosure Management Modules
(EMMs). The EMMs object action window can have the following tab, depending on the user’s group
privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the EMMs. The status is visually indicated with the icons described in "Storage Component Severity."
Property information includes name, state, part number, firmware version, and SCSI rate.
Fans
Clicking the Fans object allows you to view information about the enclosure fans. The Fans object action
window can have the following tab, depending on the user’s group privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the fans. The status is visually indicated with the icons described in "Storage Component Severity."
Property information includes fan name, state, part number, and speed.
Power Supplies
Clicking the Power Supplies object allows you to view information about the enclosure power supplies.
The Power Supplies object action window can have the following tab, depending on the user’s group
privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the enclosure power supplies. The status is visually indicated with the icons described in "Storage
Component Severity."
Property information includes name, state, and part number.