User's Manual

42 omreport: Viewing System Status Using the Instrumentation Service
Example Command for Event Type
When you type:
omreport system events type=fans
The following is an example output:
-----------
Fans
-----------
Settings
Enable: Critical
Disable: Informational and Warning
omreport system operatingsystem
Use the omreport system operatingsystem command to display operating system information.
omreport system pedestinations
Use the omreport system pedestinations command to view destinations where alerts for platform events
are configured to be sent. Depending on the number of destinations displayed, you can configure a
separate IP address for each destination address.
Ty p e :
omreport system pedestinations
Table 3-6. System Events by Component Type
name=value pair Description
type=accords Reports events for AC power cords.
type=battery Reports events for batteries
type=currents Reports events for fan amperage probes.
type=fanenclosures
Reports events for fan enclosures.
type=fans Reports events for fans.
type=intrusion Reports events for chassis intrusion.
type=log Reports events for logs.
type=memory Reports events for memory.
type=powersupplies Reports events for power supplies.
type=redundancy Reports events for redundancy.
type=temps Reports events for temperatures.
type=volts Reports events for voltages.