User's Manual

178 Using the Storage Management Service
omconfig Disable Enclosure Alarm
Use the following omconfig command syntax to disable the enclosure alarm.
Complete Syntax
omconfig storage enclosure action=disablealarm controller=id
enclosure=<ENCLOSUREID>
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.
Example for SCSI, SATA, and ATA Controllers:
For example, to disable the alarm on the enclosure attached to connector 2 on controller 1, enter:
omconfig storage enclosure action=disablealarm controller=1
enclosure=2
Example for SAS Controllers:
For example, to disable the alarm on enclosure 2 attached to connector 1 on controller 1, enter:
omconfig storage enclosure action=disablealarm controller=1
enclosure=1:2
omconfig Enable Smart Thermal Shutdown
The omconfig storage enclosure action=enablests command was supported in previous releases of
Storage Management. This command has been replaced by the omconfig storage globalinfo action=
enablests command. When enabling smart thermal shutdown and creating CLI scripts, it is preferable to
use the omconfig storage globalinfo action=enablests command.
See the "omconfig Global Enable Smart Thermal Shutdown" command for more information.
omconfig Disable Smart Thermal Shutdown
The omconfig storage enclosure action=disablests command was supported in previous releases of
Storage Management. This command has been replaced by the omconfig storage globalinfo action=
disablests command. When disabling smart thermal shutdown and creating CLI scripts, it is preferable to
use the omconfig storage globalinfo action=disablests command.
See the "omconfig Global Disable Smart Thermal Shutdown" command for more information.
omconfig Set Enclosure Asset Tag
Use the following omconfig command syntax to specify the enclosure’s asset tag:
Complete Syntax
omconfig storage enclosure action=setassettag controller=id
enclosure=<ENCLOSUREID> assettag=<string>