Reference Guide

128 Index
128 Index
R
r2 generated system
messages, 57
Rebuild completed with
errors, 85
Rebuild not possible as
SAS/SATA is not
supported in the same
virtual disk., 116
Recharge count maximum
exceeded, 93
Redundancy degraded, 30, 78
Redundancy is offline, 29
Redundancy lost, 30, 79
Redundancy normal, 79
Redundancy not
applicable, 29, 50
Redundancy regained, 30
Redundancy sensor has
failed, 29
Redundancy sensor value
unknown, 29, 50
redundancy unit messages, 28
redundancy unit sensor, 8
S
SAS expander error
%1, 115
SAS port report
%1, 108
SAS SMP communications
error %1., 114
SCSI sense data, 71
SCSI sense sector reassign, 80
See the Readme file for a list
of validated controller
driver versions, 86
sensor
AC power cord, 9
chassis intrusion, 8
current, 8
fan, 8
fan enclosure, 9
hardware log, 9
memory prefailure, 8
power supply, 8
processor, 9, 39
redundancy unit, 8
temperature, 8
voltage, 8
Server Administrator
starting, 15
Server Administrator startup
complete, 15
Service tag changed, 84
Single-bit ECC error limit
exceeded., 90
Single-bit ECC error., 100
Single-bit ECC error. The
DIMM is critically
degraded., 106
Single-bit ECC error. The
DIMM is critically
degraded. There will be
no further reporting., 107
Single-bit ECC error. The
DIMM is degrading., 106
Smart configuration
change, 73
Smart FPT exceeded, 73
SMART thermal shutdown is
disabled., 96
SMART thermal shutdown is
enabled., 96
Smart warning, 74
Smart warning degraded, 76
Smart warning
temperature, 75
SMBIOS data is absent, 16
System Event Log
Messages, 45
system management data
manager started, 16
system management data
manager stopped, 16
T
Temperature dropped below
the minimum failure
threshold, 72
Temperature dropped below
the minimum warning
threshold, 72
Temperature exceeded the
maximum failure
threshold, 72
Temperature exceeded the
maximum warning
threshold, 72
temperature sensor, 8