Reference Guide

Index 125
chassis intrusion messages, 27
Chassis intrusion returned to
normal, 27
chassis intrusion sensor, 8
Chassis intrusion sensor
detected a non-
recoverable value, 28, 49
Chassis intrusion sensor has
failed, 27
Chassis intrusion sensor value
unknown, 27, 49
Communication regained, 85
Communication timeout, 82
Communication with the
enclosure has been
lost., 101
Controller alarm disabled, 83
Controller alarm enabled, 83
Controller alarm has been
tested, 85
Controller battery is
reconditioning, 73
Controller battery low, 83
Controller battery
recondition is
completed, 73
Controller configuration has
been reset, 85
Controller event log
%1, 109-110
Controller log file entry
%1, 96
Controller rebuild rate has
changed, 83
cooling device messages, 20
current sensor, 8
Current sensor detected a
failure value, 26
Current sensor detected a
non-recoverable value, 26
Current sensor detected a
warning value, 25
Current sensor has failed, 24,
48
current sensor messages, 24
Current sensor returned to a
normal value, 25, 48
Current sensor value
unknown, 24
D
Dead disk segments
restored, 82
Dedicated hot spare assigned.
Physical disk %1, 91
Dedicated hot spare
unassigned. Physical disk
%1, 91
Dedicated spare imported as
global due to missing
arrays, 116
Device failed, 63
Device returned to normal, 78
Diagnostic message %1, 105-
106
Drive Events, 52
Driver version mismatch, 81
drives messages, 52
E
Enclosure alarm disabled, 82
Enclosure alarm enabled, 82
Enclosure firmware download
failed.The system was
unable to download
firmware to the enclosure.
The controller may have
lost communication with
the enclosure. There may
have been problems with
the data transfer or the
download media may be
corrupt., 114
Enclosure firmware download
in progress., 113
Enclosure firmware
mismatch, 77
Enclosure was shut down, 76
entity presence messages, 58
Error occurred
%1, 112
event description
reference, 12
F
Failure prediction threshold
exceeded due to test, 76
Fan enclosure inserted into
system, 35