Reference Guide

114 Storage Management Message Reference
2355 Enclosure firmware
download failed.
Warning /
Non-critical
Cause: The system was unable to download
firmware to the enclosure. The controller may
have lost communication with the enclosure.
There may have been problems with the data
transfer or the download media may be
corrupt.
Action: Attempt to download the enclosure
firmware again. If problems continue, check
if the controller can communicate with the
enclosure. Make sure that the enclosure is
powered on. Check the cables. Check the
health of the enclosure and its components.
To check the health of the enclosure, select
the enclosure object in the tree view. The
Health subtab displays a red X or yellow
exclamation point for enclosure components
that are failed or degraded.
None 853
2356 SAS SMP
communications
error %1.
Critical /
Failure /
Error
Cause: The %1 indicates a substitution
variable. The text for this substitution
variable is generated by the firmware and is
displayed with the alert in the Alert Log. This
text can vary depending on the situation. The
reference to SMP in this text refers to SAS
Management Protocol.
Action: There may be a SAS topology error.
See the hardware documentation for
information on correct SAS topology
configurations. There may be problems with
the cables such as a loose connection or an
invalid cabling configuration. See the
hardware documentation for information on
correct cabling configurations. Check if the
firmware is a supported version.
None 754
Table 4-4. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action Clear
Event
Number
SNMP
Trap
Numbers