CIM Reference Guide

48 CIM_LogicalElement
CIM_Controller
The CIM_Controller class shown in Table 3-24 groups miscellaneous control-related devices. Examples
of controllers are small computer system interface (SCSI) controllers, Universal Serial Bus (USB)
controllers, and serial controllers.
Table 3-23. CIM_PowerSupply Properties
Class Name: CIM_PowerSupply
Parent Class: CIM_LogicalDevice
Property Description Data Type
IsSwitchingSupply Indicates that the power supply is a switching power supply and
not a linear power supply.
Boolean
Range1InputVoltageLow Indicates the low voltage in millivolts of input voltage range 1 for
this power supply. A value of 0 denotes unknown.
uint32
Range1InputVoltageHigh Indicates the high voltage in millivolts of input voltage range 1 for
this power supply. A value of 0 denotes unknown.
uint32
ActiveInputVoltage Indicates which input voltage range is currently in use. Range 1, 2,
or both can be specified using the values 3, 4, or 5, respectively.
If the supply is not drawing power, a value of 6 (neither) can be
specified. This information is necessary in the case of an
uninterruptible power supply (UPS), a subclass of power supply.
Values for the ActiveInputVoltage property are as follows:
1 Other
2 Unknown
3 Range 1
4 Range 2
5 Both range 1 and range 2
6 Neither range 1 nor range 2
uint16
TotalOutputPower Represents the total output power of the power supply in
milliwatts. A value of 0 denotes that the power output is unknown.
uint32
CIM_ ManagedSystemElement
CIM_LogicalElement
CIM_LogicalDevice
CIM_Controller