Reference Guide

624 Storage Management Alert Reference
2169 The controller
battery needs
to be replaced.
Critical/Failure
/Error
Cause: The controller battery cannot recharge. The
battery may be old or it may have been already
recharged the maximum number of times. In addition,
the battery charger may not be working.
Action: Replace the battery pack.
1154 None
2170 The controller
battery charge
level is
normal.
OK/Normal/
Informational
Cause: This alert is provided for informational
purposes.
Action: None.
1151 None
2171 The controller
battery
temperature is
above normal.
Wa rn ing/
Non-critical
Cause: The battery may be in the process of recharging.
The room temperature may also be too hot. The fan in
the system may also be degraded or failed.
Action: If this alert was generated due to a battery
recharge, then the situation will correct itself when the
recharge is complete. You should also verify that the
room temperature is normal and that system
components such as the fan are functioning properly.
1153 None
2172 The controller
battery
temperature is
normal.
OK/Normal/
Informational
Cause: This alert is provided for informational
purposes.
Action: None.
1151 None
2174 The controller
battery has
been removed.
Wa rn ing/
Non-critical.
Cause: The controller cannot communicate with the
battery. The battery may be removed. The contact
point between the controller and the battery may also
be burned or corroded.
Action: Verify whether the battery is present. Replace
the battery if it is not present. If the contact point
between the battery and the controller is burned or
corroded, you will need to replace either the battery or
the controller or both. Refer to the hardware
documentation for information on how to safely access,
remove, and replace the battery.
1153 None
2175 The controller
battery has
been replaced.
OK/Normal/
Informational
Cause: This alert is provided for informational
purposes.
Action: None.
1151 None
Table 26-2. Storage Management Messages (continued)
Event
ID
Description Severity Cause and Action SNMP
Trap
Numbers
Array
Manager
Event
Number