Users Guide

Instrumentation Service 77
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the fans. The status is visually indicated with the icons described in "Storage Component Severity."
Property information includes fan name, state, part number, and speed.
Power Supplies
Clicking the Power Supplies object allows you to view information about the enclosure power supplies.
The Power Supplies object action window can have the following tabs, depending on the user’s group
privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the enclosure power supplies. The status is visually indicated with the icons described in "Storage
Component Severity."
Property information includes name, state, and part number.
Temperatures
Clicking the Temperatures object allows you to view information about the enclosure temperature
probes. The Temperatures object action window can have the following tabs, depending on the user’s
group privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the enclosure temperature probes. The status is visually indicated with the icons described in "Storage
Component Severity."
Property information includes name, state, and reading (current temperature). The minimum and
maximum values set for the temperature probes’ Warning and Failure thresholds are also displayed
under this tab.
Virtual Disks
Clicking the Virtual Disks object allows you to view information about the virtual disks configured on
the controller. The Virtual Disks object action window can have the following tabs, depending on the
user’s group privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the property information of the virtual disks
configured on the controller. Property information includes name, state, and layout (RAID level). The
read, write, and cache policy and stripe size are also displayed. You can also execute virtual disk tasks
in this tab.