Users Guide

74 Instrumentation Service
• View the results for the diagnostics test that have been run.
• View any current hardware configuration changes (hardware configuration differences).
• Configure settings for diagnostics tests and log files.
• View a list of scheduled tests and make changes to them.
NOTE: See "Diagnostic Service" for complete instructions on using the Server Administrator Diagnostic Service
Volumes
Clicking the Volumes object allows you to view information about volumes on your system. A volume
may be formatted and may have a file system and/or drive letter. The Volumes object action window can
have the following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Volumes
Under the Properties tab, you can view the current status of and detailed information about your volumes.
Storage Management Service
In the case of Storage Management Service, clicking the Storage object allows you to view the status and
settings for the supported controllers attached to the system. The controller object expands to display
the storage devices attached to the controller.
Depending on the controller and storage attached to the system, the expanded Storage object may
display the following lower-level objects:
•Controller
• Battery
• Connector
• Enclosure or Backplane
•Array Disks
•EMMs
•Fans
• Power Supplies
•Temperatures
• Virtual Disks
• Firmware/Driver Versions
The Storage object action window can have the following tabs, depending on the user’s group
privileges: Properties.