Users Guide

Diagnostic Service 123
5 After you have selected the tests you want to run, click Execute Tests .
The tests are queued for execution in the order in which they were selected.
NOTE: If you want to schedule the tests to run at a later time, see "Scheduling Diagnostics."
6 Click Status to monitor the status of the test execution.
The
Diagnostic Status window opens. The icons in the Status column indicate the status of each test.
The In Progress icon ( ) indicates that the test is being executed. If you have executed this test from the
command line, you will see the CLI icon ( ) next to the In Progress icon. If it is a scheduled test, you will
see the Scheduler icon ( )next to the In Progress icon.
The Aborted icon ( ) indicates that the test has been aborted.
The Suspended icon ( )indicates that test has been suspended. Click
Resume to resume the execution
of this test.
The OK icon ( ) indicates that test has been executed successfully.
The Noncritical icon ( )indicates that noncritical errors were encountered during the execution of
the test.
The Critical icon ( ) indicates that the test has failed.
• Click
Abort to stop the current test. Click Abort All to stop all the queued tests.
• Click
Suspend to suspend the execution of the test. Click Resume when you want the test execution to
be resumed.
• Click
Clear Completed to remove the completed tests from the window. However, clicking this button
will not clear the following tests:
• Tests that are currently running
• Tests that have been submitted from the CLI, irrespective of whether they are completed or not
• Click
View to view the test execution progress.
The
Diagnostic Progress window opens. A progress bar indicates the percentage complete for each pass
of every test.
Click
Back to Status Page to return to the Diagnostic Selection window.
• Click
View Results to view the details of the test results. The Diagnostic Result History - Result
Details
window opens.