Users Guide
122 Diagnostic Service
Re-enumerating Devices
The system enumerates the testable devices on your system whenever the system is rebooted or the secure
port server is restarted. In addition, you can perform an enumeration by using the reenumeration feature.
To reenumerate devices, perform the following steps:
1
In the Server Administrator main window, click the
Diagnostics
tab.
2
In the
Diagnostic Selection
window, click
Re-enumerate
.
NOTE: This process can take several minutes on some systems.
3
Click
Enumeration Status
to view the progress of the enumeration process.
The
Diagnostic Re-Enumeration Progress
window opens. A progress bar indicates the percentage complete
of the enumeration process.
Running Diagnostics
To run diagnostic tests, perform the following steps:
1
In the Server Administrator main window, click the
Diagnostics
tab.
2
In the
Diagnostic Selection
window, select the tests you want to run.
The following controls are available on the
Diagnostic Selection
window:
•In the
Available Devices
list, select a device to view the applicable tests for that device.
To get information about a device and the tests that can be run on it, click the Information ( ) icon.
• Select
Show All Applicable Tests
to view all the tests that are applicable to the system.
Select
Show Tests for Selected Device Only
to view only those tests that are applicable to the device
selected in the
Available Devices
list.
• Select the desired tests in the
Available Tests
list.
3
Click
Review Selection
.
4
The
Diagnostic Selection Review
window lists the currently selected diagnostics tests.
• Click the icon to remove a test from the list.
•Click
Change
to change the test settings.
The
Diagnostic Test Execution Settings
window lists the current settings. Make the required changes
and click
Apply Changes
.
If you do not make any changes, click
Go Back to Review Selection Page
.
•Click
View
to view the test details.
In the
Diagnostic Review Selection Details
window, click
Back to Review Screen
.
•Click
Select More Tests
to navigate to the
Diagnostic Selection
window and select more tests.