Users Guide
Diagnostic Service 119
Diagnostic Service Features
In addition to diagnostic tests for devices listed in the section "Devices Supported by the Diagnostic Service,"
the Diagnostic Service offers the following features:
•
Device Enumeration
This feature enables you to reenumerate all testable devices on your system.
To access this feature, click the
Diagnostics tab
and then click
Re-enumerate
.
•
Device and Test Selection
This feature enables you to select the devices on which you want to run diagnostic tests and the tests you
want to run.
To access this feature, click the
Diagnostics tab
and then click
Select
.
•
Diagnostic Scheduler
This feature enables you to select diagnostic tests to run at specific times and at specific frequencies.
For more information on configuring this feature, see "Scheduling Diagnostics."
•
Diagnostic Test Review
This feature enables you to review the selected diagnostic tests.
To access this feature, click the
Diagnostics tab
and then click
Review
.
•
Diagnostic Test Status
This feature enables you to view the status of the diagnostic tests that are running.
To access this feature, click the
Diagnostics tab
and then click
Status
.
•
Diagnostic Result History
This feature enables you to view the result history log file. This log file contains a record of the results of
previously run diagnostics tests. You can specify the maximum size of this log file in the
Diagnostic
Application Settings
window.
To access this feature, click the
Diagnostics tab
and then click
Results
.
•
Hardware Configuration Changes
This feature enables you to view changes that have occurred to the testable devices on your system since
the system was rebooted, the secure port server was restarted, or reenumeration was performed. It reports
the changes in the system configuration, such as the addition or removal of the hard drive.
To access this feature, click the
Diagnostics tab
and then click
Hardware Changes
.
•
Hardware Configuration Change History
This feature enables you to view a log file that contains a history of hardware configuration changes.
To access this feature, click the
Diagnostics tab
, click
Hardware Changes
, and then click
Hardware
Change History
.