User's Manual

omconfig: Managing Components Using the Instrumentation Service 85
config=serialoverlan
(continued)
baudrate=9600 | 19200 | 38400 |
57600 | 115200
9600: Sets the volatile and nonvolatile
connection speed to 9600 bits per
second.
19200: Sets the volatile and
nonvolatile connection speed to
19200 bits per second.
38400: Sets the volatile and
nonvolatile connection speed to
38400 bits per second.
57600: Sets the volatile and
nonvolatile connection speed to
57600 bits per second.
115200: Sets the volatile and
nonvolatile connection speed to
115200 bits per second.
NOTE: Baud rates of 9600 and 19200
are supported on PowerEdge 1800,
1850, 2800, and 2850 systems.
Baud rates of 9600, 19200, and 57600 are
supported on PowerEdge 1900, 1950,
1955, 2900, and 2950 systems.
Baud rate of 115200 is supported on
certain systems that have a DRAC 5
installed.
privilegelevel=administrator | operator
| user
administrator: Sets the maximum
privilege level that can be accepted on
a serial over LAN channel, to
Administrator.
operator: Sets the maximum privilege
level that can be accepted on a serial
over LAN channel, to Operator.
user: Sets the maximum privilege
level that can be accepted on a serial
over LAN channel, to User.
config=settodefault Takes the default configuration
settings.
Table 5-3. omconfig chassis bmc (continued)
name=value pair 1
config=
name=value pair 2 Description