User's Manual

76 omconfig: Managing Components Using the Instrumentation Service
attribute=fbr setting=9600 | 19200 | 57600 |
115200
9600: Sets the console redirection failsafe
baud rate to 9600 bits per second.
19200: Sets the console redirection failsafe
baud rate to 19200 bits per second.
57600: Sets the console redirection failsafe
baud rate to 57600 bits per second.
115200: Sets the console redirection failsafe
baud rate to 115200 bits per second.
attribute=ide setting=on | off
force=true
on: Enables this device.
off: Disables this device.
force=true: Verification of setting change.
attribute=idepridrv setting=off | auto off: Disables the device.
auto: Automatically detect and enable
the device.
attribute=intrusion setting=enable | disable enable: Enables the intrusion check
during system boot. If the system also
has bezel intrusion checking, then the
intrusion option checks for removal of
the bezel of the system.
disable: Disables the intrusion check
during system boot.
attribute=mouse setting=on | off on: Enable the mouse.
off: Disable the mouse.
attribute=nic setting=enabled | disabled
| enablednonepxe
enabled: Enable the NIC during system
boot (with PXE on if the system has PXE).
disabled: Disable the NIC during
system boot.
enablednonepxe: Enable the NIC during
system boot (with PXE off if the system
has PXE).
Table 5-2. BIOS Setup (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description