User's Manual

omdiag: Using the Diagnostic Service 25
omdiag about
Use the omdiag about command to learn the product name and version number of the systems
management application installed on your system. The following is an example output from the omdiag
about command:
Product name : Dell OpenManage Server Administrator
Version : 5.
x . x
Copyright : Copyright (C) Dell Inc.
1995-2006. All rights reserved.
Company : Dell Inc.
storage cddvd
floppy
raidctrl
idedevdiag
sasdevdiag
scsidevdiag
Runs the CD/DVD drive test.
Runs the diskette drive test.
Runs the RAID control and attached device test.
Runs the IDE disk tests.
Runs Serial Attached SCSI (SAS), SAS RAID
controller, and attached device tests.
Runs the SCSI controller and attached tape and
hard drive tests.
passes=<n> Runs a test n time(s).
time=
<minutes>
Runs a test for no more than the specified
number of minutes <minutes>.
quicktest=
<true/false>
Uses a faster algorithm to conduct a specific test
if one is available.
haltonerror=
<true/false>
Stops the tests if an error is encountered.
Device=
<number>
Specifies the device on which to run the test.
Table 3-1. omdiag Command Level 1, Level 2, and Level 3 (continued)
Command
level 1
Command
level 2
Command
level 3
name=value
pair
Use