User's Manual

202 Using the Storage Management Service
omconfig Set Enclosure Asset Tag
Use the following omconfig command syntax to specify the enclosure’s asset tag:
Complete Syntax
omconfig storage enclosure action=setassettag controller=id
enclosure=<ENCLOSUREID> assettag=<string>
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.
In this syntax, <string> is a user-specified alphanumeric string.
Example for SCSI, SATA, and ATA Controllers:
For example, to specify the asset tag to encl20 on the enclosure attached to connector 2 on
controller 1, enter:
omconfig storage enclosure action=setassettag controller=1
enclosure=2 assettag=encl20
Example for SAS Controllers:
For example, to specify the asset tag to encl20 on enclosure 2 attached to connector 1 on
controller 1, enter:
omconfig storage enclosure action=setassettag controller=1
enclosure=1:2 assettag=encl20
omconfig Set Enclosure Asset Name
Use the following omconfig command syntax to specify the asset name for an enclosure.
Complete Syntax
omconfig storage enclosure action=setassetname controller=id
enclosure=<ENCLOSUREID> assetname=<string>
where id is the controller ID. The <ENCLOSUREID> variable specifies the enclosure.
In this syntax, <string> is a user-specified alphanumeric string.
Example for SCSI, SATA, and ATA Controllers:
For example, to specify the asset name to encl43 for the enclosure attached to connector 2 on
controller 1, enter:
omconfig storage enclosure action=setassetname controller=1
enclosure=2 assetname=encl43