User's Manual

Using the Storage Management Service 163
omreport EMM Status
omreport Array Disk Status
Table 9-12. omreport EMM Commands
Required Command Levels (1, 2, 3)
and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the
system.
controller=id enclosure=
<ENCLOSUREID>
info=emms
where id is the controller number
and the enclosure number.
For example: controller=0
enclosure=2
Displays the enclosure
management modules (EMMs)
for the specified enclosure.
controller=id enclosure=
<ENCLOSUREID>
info=emms index=n
where id is the controller number
and the enclosure number and “n”
is the number of an EMM.
For example: controller=0
enclosure=2
info=emms index=1
Displays the specified EMMs.
Table 9-13. omreport Array Disk Commands
Required Command Levels (1, 2, 3) and
name=value pair
Optional name=value pairs Use
omreport storage adisk controller=id
where id is the controller number. For
example: controller=0
Displays all array disks attached
to the specified controller.
connector=id
where id is the connector
number. For example:
connector=1
Displays all array disks attached
to the specified connector on the
controller.
vdisk=id
where id is the virtual disk
number. For example: vdisk=1
Displays all array disks included
in the specified virtual disk on
the controller.