User's Manual

Using the Storage Management Service 157
adisk=<ADISKID> Indicates a particular array disk by specifying either connector:targetID or
connector:enclosureID:portID.
To obtain the values for the connector, enclosure, and array disk (targetID or
portID), you would enter omreport storage controller to display the controller IDs
and then enter omreport storage adisk controller=id to display the IDs for the
array disks attached to the controller.
battery=id Indicates the battery ID as reported by the omreport command. To obtain this
value, enter omreport storage controller to display the controller IDs and then
enter omreport storage battery controller=id to display the ID for the
controller battery.
< > The caret symbols (< >) enclose variable elements that you must specify.
For example, the name=<string> parameter might be specified as name=
VirtualDisk1.
[ ] The bracket symbols ([ ]) indicate optional elements that you can choose to
specify or not.
For example, when creating a virtual disk, the [name=<string>] parameter
indicates that you have the option of specifying the virtual disk name. If you omit
this parameter from the syntax, then a default name for the virtual disk is
chosen for you.
| The pipe symbol (|) separates two or more options from which one only must
be selected.
For example, when creating a virtual disk, the cachepolicy=d|c indicates that the
cache policy must be specified as either cachepolicy=d or cachepolicy=c.
Table 9-2. Syntax For Name=Value Pairs For Parameters (continued)
Syntax Description