Reference Guide

Diagnostic Service Supported Devices and Operating Systems 77
• PowerVault 110T-LTO2LC
• PowerVault 110T-LTO3
• PowerVault 132T-LTO1
• PowerVault 122T-LTO1
• PowerVault 122T-LTO2
• PowerVault MD1000
• All drives in supported arrays, autoloaders, and libraries (See "Tape Arrays, Autoloaders, and Libraries.")
Tape Arrays, Autoloaders, and Libraries
Server Administrator supports diagnostics for the following tape arrays, tape autoloaders, and
tape libraries:
• PowerVault 122T VS80
• PowerVault 122T SDLT320
• PowerVault 128T SDLT320 (supports diagnostics for tape drives only)
• PowerVault 132T SDLT320
• PowerVault 136T SDLT220
• PowerVault 136T SDLT320
Diagnostics for RAID Controllers, SCSI Controllers, and Attached
Hard Drives
NOTE: For a list of firmware requirements that are required for each controller, see "RAID Controller Supported
Servers, Operating Systems, Firmware, and Driver Versions."
This section lists Diagnostic Service support by operating system for RAID and SCSI controllers as well
as for hard drives that are attached to RAID, SCSI, and IDE controllers. With the exception of the
CERC ATA 100/4 Channel RAID controllers (IDE RAID controllers), all RAID controllers are
SCSI RAID controllers.
NOTE: Server Administrator does not support diagnostics for IDE controllers.