Messages Reference Guide

78 Storage Management Message Reference
2156 Controller alarm has
been tested
Ok / Normal Cause: The controller alarm test has run
successfully. This alert is provided for
informational purposes.
Action: None
751 None
2157 Controller
configuration has
been reset
Ok / Normal Cause: A user has reset the controller
configuration. See the online help for more
information. This alert is provided for
informational purposes.
Action: None
751 None
2158 Array disk online Ok / Normal Cause: An offline array disk has been made
online. This alert is provided for informational
purposes.
Action: None
901 None
2159 Virtual disk renamed Ok / Normal Cause: A user has renamed a virtual disk.
This alert is provided for informational
purposes.
NOTE: When renaming a virtual disk on a
PERC
2, 2/Si, 3/Si, 3/Di, CERC SATA 1.5/6ch,
or
CERC SATA 1.5/2s controller, this alert
displays the new virtual disk name. On the
PERC 2/SC, 2/DC, 3/SC, 3/DCL, 3/DC, 3/QC,
4/SC, 4/DC, 4e/DC, 4/Di, 4/IM, 4e/Si, 4e/Di,
and CERC ATA 100/4ch controllers, this alert
displays the original virtual disk name.
Action: None
1201 608
2160 Dedicated hotspare
assigned
Ok / Normal Cause: A user has assigned an array disk as a
dedicated hot spare to a virtual disk. See the
online help for more information. This alert
is provided for informational purposes.
Action: None
901 574
2161 Dedicated hotspare
unassigned
Ok / Normal Cause: A user has unassigned an array disk as
a dedicated hot spare to a virtual disk. See the
online help for more information. This alert
is provided for informational purposes.
Action: None
901 575
Table 4-1. Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap
Numbers
Array
Manager
Event
Number