Users Guide

Working With the Baseboard Management Controller (BMC) 87
Configuring the BMC to use a Virtual LAN Connection
You can configure the BMC on a virtual LAN (VLAN).
1
Click the System object.
2 Click the Main System Chassis object.
3 Click the BMC object.
4 Click the Configuration tab.
5 Click LAN .
The LAN Configuration page appears.
NOTE: BMC management traffic will not function if the LAN on motherboard (LOM) is used in a Port Channel
or Link Aggregation team.
6 Specify the following NIC configuration details:
• Enable LAN Interface
• IP Address Source
• IP Address
• Subnet Mask
• Gateway Address
• MAC Address
• Channel Privilege Level Limit
7 Specify the following VLAN configuration details:
•VLAN ID Enable
•VLAN ID
• Priority
8 Click Apply Changes.