Users Guide

82 Working With the Baseboard Management Controller (BMC)
Viewing Basic BMC Information
You can view the basic information about the BMC and also reset the BMC settings to their default values.
NOTE: You must be logged in with Admin privileges to reset the BMC settings.
1 Click the System object.
2 Click the Main System Chassis object.
3 Click the BMC object.
The BMC page displays the following base information of the system’s BMC:
•BMC Name
• IPMI Version
• System GUID
• Number of Possible Active Sessions
• Number of Current Active Sessions
• LAN Enabled
• SOL Enabled
• IP Address Source
• IP Address
• IP Subnet
• IP Gateway
• MAC Address
Configuring BMC Users
BMC users can be configured through the BMC User Configuration page; this page is accessed by
browsing through the following path.
1
Click the System object.
2 Click the Main System Chassis object.
3 Click the BMC object.
4 Click the Users tab.
5 Click the Users subtab.
The
BMC Users window displays information about users that can be configured as BMC users.
NOTE: BMC Users are created independently of the users assigned or created through Server Administrator
or the operating system.