Users Guide

78 Instrumentation Service
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the EMMs. The status is visually indicated with the icons described in "Storage Component Severity."
Property information includes name, state, part number, firmware version, and SCSI rate.
Fans
Clicking the Fans object allows you to view information about the enclosure fans. The Fans object
action window can have the following tabs, depending on the user’s group privileges:
Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the fans. The status is visually indicated with the icons described in "Storage Component Severity."
Property information includes fan name, state, part number, and speed.
Power Supplies
Clicking the Power Supplies object allows you to view information about the enclosure power supplies.
The Power Supplies object action window can have the following tabs, depending on the user’s group
privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the enclosure power supplies. The status is visually indicated with the icons described in "Storage
Component Severity."
Property information includes name, state, and part number.
Temperatures
Clicking the Temperatures object allows you to view information about the enclosure temperature
probes. The Temperatures object action window can have the following tabs, depending on the user’s
group privileges: Configuration/Information.
Configuration/Information
Under the Configuration/Information tab, you can view the current status and property information of
the enclosure temperature probes. The status is visually indicated with the icons described in "Storage
Component Severity."
Property information includes name, state, and reading (current temperature). The minimum and maximum
values set for the temperature probes’ Warning and Failure thresholds are also displayed under this tab.
Virtual Disks
Clicking the Virtual Disks object allows you to view information about the virtual disks configured on
the controller. The Virtual Disks object action window can have the following tabs, depending on the
user’s group privileges: Configuration/Information.