Users Guide

70 Instrumentation Service
Remote Access Controller
Clicking the Remote Access Controller object allows you to access your system's remote system
management capabilities. The Server Administrator Remote Access Service provides remote access to
inoperable systems, alert notification when a system is down, and the ability to restart a system.
The Remote Access Controller object action window can have the following tabs, depending on the
user's group privileges: Properties, Configuration, Users, Remote Connect, Security, Update, and
Diagnostics.
Properties
Subtab: Information
Under the Properties tab, you can view information about each remote access controller (RAC) attribute.
Configuration
Subtabs: Network | SNMP | Demand Dial-Out | Dial-In Users | Remote Features | Modem
Under the Configuration tab, you can:
• Configure network properties.
• Configure SNMP traps.
• Configure demand dial-out entries.
• Configure dial-in users.
• Configure remote properties such as remote boot parameters.
• Configure modem properties.
Users
Subtab: Information
Under the Users tab, you can add, configure, and view information about Remote Access Service users.
Remote Connect
Under the Remote Connect tab, you can access the RAC.
Security
Subtabs: CSR Management | Authentication Options
Under the Security tab, you can:
• Perform CSR certificate management by generating a new CSR certificate, uploading an existing CSR
certificate, viewing an existing server certificate, or viewing an existing CA certificate.
• Set login authentication options to only allow remote access controller login by users created thought
the Remote Access Service (RAC users), or to allow remote access controller login by users created
through the Remote Access Service and through the local operating system.