Users Guide

Instrumentation Service 67
Properties
Subtab: Memory
Under the Properties tab, you can view memory attributes, memory device details, and memory device
status.
NOTE: If a system with spare bank memory enabled enters a redundancy lost state, it may not be apparent which
memory module is the cause. If you cannot determine which DIMM to replace, see the switch to spare memory
bank detected log entry in the ESM system log to find which memory module failed.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event
that a memory module returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels for memory modules.
The selected traps will be triggered if the system generates a corresponding event at the selected
severity level.
Diagnostics
Subtabs: Select | Review | Status | Results | Hardware Changes | Settings | Scheduled Tasks
Under the Diagnostics tab, you can:
• View and select to run all available diagnostics tests for components installed in your system.
• Review the selected tests.
• View the status of the tests being executed.
• View the results for the diagnostics test that have been run.
• View any current hardware configuration changes (hardware configuration differences).
• Configure settings for diagnostics tests and log files.
• View a list of scheduled tests and make changes to them.
NOTE: See "Diagnostic Service" for complete instructions on using the Server Administrator Diagnostic Service.
Network
Clicking the Network object allows you to manage your system's NICs. Server Administrator monitors
the status of each NIC present in your system to ensure continuous remote connection. The Network
object action window can have the following tabs, depending on the user's group privileges:
Properties and Diagnostics.