Users Guide

66 Instrumentation Service
Firmware
Clicking the Firmware object allows you to manage your system firmware. Firmware consists of programs or
data that have been written to ROM. Firmware can boot and operate a device. Each controller contains
firmware that helps provide the controller's functionality. The Firmware object action window can have the
following tab, depending on the user's group privileges: Properties.
Properties
Subtab: Information
Under the Properties tab, you can view your system's firmware information.
Intrusion
Clicking the Intrusion object allows you to manage your system's chassis intrusion status. Server
Administrator monitors chassis intrusion status as a security measure to prevent unauthorized access to
your system's critical components. Chassis intrusion indicates that someone is opening or has opened the
cover to the system's chassis. The Intrusion object action window can have the following tabs, depending
on the user's group privileges: Properties and Alert Management.
Properties
Subtab: Intrusion
Under the Properties tab, you can view the chassis intrusion status.
Alert Management
Subtabs: Alert Actions | SNMP Traps
Under the Alert Management tab, you can:
• View current alert actions settings and set the alert actions that you want to be performed in the event
that the intrusion sensor returns a warning or failure value.
• View current SNMP trap alert thresholds and set the alert threshold levels for the intrusion sensor.
The selected traps will be triggered if the system generates a corresponding event at the selected
severity level.
Memory
Clicking the Memory object allows you to manage your system's memory devices. Server Administrator
monitors the memory device status for each memory module present in the monitored system. Memory
device prefailure sensors monitor memory modules by counting the number of ECC memory
corrections. Server Administrator also monitors memory redundancy information if your system supports
this feature. The Memory object action window can have the following tabs, depending on the user's
group privileges: Properties, Alert Management, and Diagnostics.