Users Guide

64 Instrumentation Service
The BMC object action window can have the following tabs, depending on the user's group privileges:
Properties, Configuration, Users, and BIOS Setup.
Properties
Subtab: Information
Under the Properties tab, you can view general BMC information. Click Reset to Defaults to reset all the
attributes to their system default values.
Configuration
Subtabs: LAN | Serial Port | Serial Over LAN
Under the Configuration tab, you can configure the BMC on a LAN, the serial port for the BMC, and
the BMC on a serial over LAN connection.
Users
Subtab: BMC Users
Under the Users tab, you can modify the BMC user configuration.
BIOS Setup
Subtabs: Serial Configuration | Console Redirection | Console Redirection Failsafe Baud Rate
Under the BIOS Setup tab, you can modify the state of the Serial Port, Console Redirection, and
Console Redirection Failsafe Baud Rate.
NOTE: The NIC configuration information within the Server Administrator BIOS Setup screen may be inaccurate
for embedded NICs. Using the BIOS Setup screen to enable or disable NICs might produce unexpected results. It is
recommended that you perform all configurations for embedded NICs through the actual System Setup screen that
is available by pressing <F2> while a system is booting.
Currents
Clicking the Currents object allows you to manage current levels in your system. Server Administrator
monitors currents across critical components in various chassis locations in the monitored system.
The Current object action window can have the following tabs, depending on the user's group privileges:
Properties and Alert Management.
Properties
Subtab: Current Probes
Under the Properties tab, you can:
• View the current readings and status for your system's current probes.
• Configure current probe warning threshold values.
• Set alert actions in the event that a current probe returns a warning or failure value.
NOTE: When assigning probe threshold values, Server Administrator sometimes rounds the minimum or maximum
values you enter to the closest assignable value.