Users Guide

110 Storage Management Service
4 Select Assign Dedicated Hot Spare from the Available Tasks drop-down menu.
5 Click Execute.
6 See the enhanced Storage Management online help for more information.
To assign a global hot spare:
1
Expand the Storage tree object to display the controller objects.
2 Expand a Controller object.
3 Expand a Connector object.
4 Expand the Enclosure or Backplane object.
5 Select the Array Disks object.
6 Select the Information/Configuration subtab.
7 Select a Assign Global Hot Spare from the Available Tasks drop-down menu.
8 Click Execute .
9 See the enhanced Storage Management online help for more information.
Rebuild a Failed Array Disk
If the failed array disk is part of a redundant virtual disk, then the array disk failure should not result in
data loss if replaced immediately. The rebuild task is available when the Array Disks object is selected.
See the enhanced Storage Management online help for more information.
Additional Enhanced Storage Management Features
There are many tasks associated with controllers, enclosures, virtual disks, and array disks that you can
perform with the enhanced Storage Management Service. See the enhanced Storage Management
online help for more information.
Global Tasks
The following global tasks are available when the Storage object is selected. See the enhanced Storage
Management online help for more information.
• Global Rescan. A global rescan updates configuration changes (such as new or removed devices) for all
controllers and their attached components.
•
Enable and Disable Smart Thermal Shutdown. By default, the operating system and server shut down
when the PV220S and PV221S enclosures reach a critical temperature of 0 or 50 degrees celsius. Using
the Enable Smart Thermal Shutdown task, however, you can specify that only the enclosure and not
the operating system and server be shut down when the enclosure reaches a critical temperature.
To restore the system to its default setting use the Disable Smart Thermal Shutdown task.