User's Manual

omconfig: Managing Components Using the Instrumentation Service 87
config=serial baudrate=9600 | 19200 | 38400
| 57600
9600: Sets connection speed to 9600
bits per second.
19200: Sets connection speed to
19200 bits per second.
38400: Sets connection speed to
38400 bits per second.
57600: Sets connection speed to
57600 bits per second.
flowcontrol=none | rtscts none: No control over the flow of
communication through the serial
port.
rtscts: RTS is ready to send and
CTS is clear to send.
mode=directbasic | directterminal |
directbasicterminal | modembasic |
modemterminal | modembasicterminal
directbasic: Type of messaging used
for IPMI messaging over a
serial connection.
directterminal: Messaging that uses
printable ASCII characters and that
allows a limited number of text
commands over a serial connection.
directbasicterminal: Both basic and
terminal mode messaging over a
serial connection.
modembasic: Type of messaging used
for IPMI messaging over a modem.
modemterminal: Messaging that uses
printable ASCII characters and that
allows a limited number of text
commands over a modem.
modembasicterminal: Both basic and
terminal messaging over a modem.
NOTE: Not all commands may be
supported on the system.
Table 6-3. omconfig chassis bmc (continued)
name=value pair 1
config=
name=value pair 2 Description