User's Manual

86 omconfig: Managing Components Using the Instrumentation Service
config=nic (continued) ipsource=static | dhcp |
systemsoftware
static: Static if the IP address of the
BMC LAN interface is a fixed,
assigned IP address.
dhcp: DHCP if the source of the
IP address of the BMC LAN interface
is the dynamic host
configuration protocol.
systemsoftware: System software if
the source of the IP address of the
BMC LAN interface is from the
system software.
NOTE: Not all commands may be
supported on the system.
privilegelevel=administrator | operator
| user
administrator: Sets the maximum
privilege level that can be accepted on
a LAN channel to Administrator.
operator: Sets the maximum privilege
level that can be accepted on a
LAN channel to Operator.
user: Sets the maximum privilege
level that can be accepted on a
LAN channel to User.
subnet=Subnet subnet: Sets a subnet mask if you have
selected static as the IP address source
for the BMC LAN interface.
vlanenable=true | false true: Enables the virtual
LAN identification.
false: Disables the virtual
LAN identification.
vlanid=number number: Virtual LAN identification in
the range of 1 to 4094.
vlanpriority=number number: Priority of virtual LAN
identification in the range of 0 to 7.
Table 6-3. omconfig chassis bmc (continued)
name=value pair 1
config=
name=value pair 2 Description