User's Manual

84 omconfig: Managing Components Using the Instrumentation Service
attribute=sataport (0...7) setting=off | auto off: Disable the SATA port.
auto: Automatically enable the
SATA port.
attribute=secondaryscsi setting=on | off on: Enable this device.
off: Disable this device.
attribute=serialport1 setting=off | auto | com1 | com3
| bmcserial | bmcnic | rac
off: Disable serial port 1.
auto: Map serial port 1 to a COM port.
com1: Map serial port 1 to COM port 1.
com3: Map serial port 1 to COM port 3.
bmcserial: Map serial port 1 to
BMC Serial.
bmcnic: Map serial port 1 to BMC NIC.
rac: Map serial port 1 to RAC.
attribute=serialport2 setting=off | auto | com2 | com4 off: Disable serial port 2.
auto: Map serial port 2 to a COM port.
com2: Map serial port 2 to COM port 2.
com4: Map serial port 2 to COM port 4.
attribute=speaker setting=on | off on: Enable the speaker.
off: Disable the speaker.
attribute=usb setting=enabled | disabled
NOTE: Only one of the two attributes usb
and usbb is available for configuring the
USB port(s), depending on your system’s
hardware.
enabled: Enable the USB port(s).
disabled: Disable the USB port(s).
attribute=usbb setting=enabled |
enabledwithbios| disabled
enabled: Enable the USB port(s) during
system boot, without BIOS support.
enabledwithbios: Enable the USB
port(s) during the system boot, with
BIOS support.
disabled: Disable the USB port(s) during
system boot.
Table 6-2. BIOS Setup (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description