User's Manual
omconfig: Managing Components Using the Instrumentation Service 83
attribute=primaryscsi setting=on | off
force=true
NOTICE: If you modify the setting for
primary scsi, romb, romba, or rombb, your
system becomes inoperable until you
reinstall the operating system.
on: Enable this device.
off: Disable this device.
force=true: Verification of
setting change.
attribute=romb setting=raid | off | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard as a RAID device.
off: Disable the device during
system boot.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=romba setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel A as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of
setting change.
attribute=rombb setting=raid | scsi
force=true
raid: Instructs the BIOS to detect
RAID-on-motherboard channel B as a
RAID device.
scsi: Instructs the BIOS to detect this
device as a SCSI device.
force=true: Verification of setting
change.
attribute=sata setting=off| ata | raid off: Disables SATA controller.
ata: Sets the onboard SATA controller to
ATA mode.
raid: Sets the onboard SATA controller
to RAID mode.
Table 6-2. BIOS Setup (continued)
name=value pair 1
attribute=
name=value pair 2
setting=
Description