User's Manual

omreport storage: Using the Storage Reports 73
The omreport storage osdiskinfo command provides the following information about the physical array
disks that comprise the operating system disk:
• Status — Status of the array disk.
• Label — Name of the array disk. If more than one array disk comprises a virtual disk, the name may
include the number of the array disk, for example, ArrayDisk0:0, ArrayDisk0:1 means the first and
second array disks that make ArrayDisk0.
• State — Current state of the array disk.
• Controller — Name of the RAID controller that controls the array disk.
omreport storage osdisks
Use the omreport storage osdisks command to view information about all of your operating system disks.
The following information displays for each disk that contains operating system files:
• ID — Assigned ID number for the disk. You can use this number in conjunction with the omreport
storage osdiskinfo
command to view information about a specific operating system disk. See
"omreport storage osdiskinfo" for more information.
• Status — Status of the operating system disk.
• Name — Name of the operating system disk.
• State — Current state of the operating system disk.
• Type — Type of disk, such as SCSI. Also indicates the port ID and LUN for the operating system disk.
• Vendor — Manufacturer of the disk.
• Unallocated Space — Amount of usable storage space that is available.
You can view operating system disk information for a volume by entering the volume ID as part of the
parameter. For example:
omreport storage osdisks volume=60129542154
You obtain a volume's ID by running the omreport storage volumes command. See "omreport storage
volumes" for more information.