User's Manual

omreport: Viewing System Status Using the Instrumentation Service 59
omreport system platformevents
Use the omreport system platformevents command to view how the system responds for each listed
platform event.
omreport system recovery
Use the omreport system recovery command to see whether there is an action configured for a hung
operating system. You can also view the number of seconds that must elapse before an operating system
is considered to be hung.
omreport system shutdown
Use the omreport system shutdown command to view any pending shutdown actions for your system. If
properties for shutdown are configured, executing this command displays them.
Table 4-6. omreport system pedestinations
Output Attributes Description
Destination List
Destination Number: Destination1
Destination IP Address: 101.102.103.104
destination 1: Displays the first destination.
101.102.103.104: IP address of the first destination.
Destination Number: Destination 2
Destination IP Address: 110.120.130.140
destination 2: Displays the second destination.
110.120.130.140: IP address of the second
destination.
Destination Number: Destination 3
Destination IP Address: 201.202.203.204
destination 3: Displays the third destination.
201:202:203:204: IP address of the third
destination.
Destination Number: Destination 4
Destination IP Address: 210.211.212.213
destination 4: Displays the fourth destination.
210.211.212.213: IP address of the fourth
destination.
Destination
Configuration
Settings
attribute=communitystring communitystring: Displays the text string that acts
as a password and is used to authenticate SNMP
messages sent between the baseboard management
controller (BMC) and the destination management
station.