User's Manual

58 omreport: Viewing System Status Using the Instrumentation Service
Example Command for Event Type
When you type:
omreport system events type=fans
The following is example output:
-----------
Fans
-----------
Settings
Enable : Critical
Disable : Informational and Warning
omreport system operatingsystem
Use the omreport system operatingsystem command to display operating system information.
omreport system pedestinations
Use the omreport system pedestinations command to view destinations where alerts for a platform event
have been sent. Depending on the number of destinations displayed, you can configure a separate IP
address for each destination address.
Ty p e :
omreport system pedestinations
The output from the omreport system pedestinations command lists each of the valid parameters.
NOTE: The actual number of destinations that can be configured on your system may differ.
Table 4-6 shows the available settings.
type=log Reports events for logs.
type=memory Reports events for memory.
type=powersupplies Reports events for power supplies.
type=redundancy Reports events for redundancy.
type=temps Reports events for temperatures.
type=volts Reports events for voltages.
Table 4-5. System Events by Component Type (continued)
name=value pair Description