User's Manual
Using the Storage Management Service 125
adisk=<ADISKID> Indicates a particular array disk by specifying either connector:targetID or
connector:enclosureID:portID.
To obtain the values for the connector, enclosure, and array disk (targetID or
portID), you would enter omreport storage controller to display the controller IDs
and then enter omreport storage adisk controller=id to display the IDs for the
array disks attached to the controller.
connectorNo:targetID Indicates a particular array disk by specifying the controller connector that the
array disk is attached to and the array disk number. To obtain these values, enter
omreport storage controller to display the controller IDs and then enter omreport
storage adisk controller=id to display the IDs for the array disks attached to the
controller.
For example, the connectorNo:targetID parameter might be specified as 0:3.
battery=id Indicates the battery ID as reported by the omreport command. To obtain this
value, enter omreport storage controller to display the controller IDs and then
enter omreport storage battery controller=id to display the ID for the controller
battery.
< > The caret symbols (< >) enclose variable elements that you must specify.
For example, the name=<string> parameter might be specified as name=
VirtualDisk1.
[ ] The bracket symbols ([ ]) indicate optional elements that you can choose to
specify or not.
For example, when creating a virtual disk, the [name=<string>] parameter
indicates that you have the option of specifying the virtual disk name. If you omit
this parameter from the syntax, then a default name for the virtual disk is chosen
for you.
| The pipe symbol (|) separates two or more options from which one only must be
selected.
For example, when creating a virtual disk, the cachepolicy=d|c indicates that the
cache policy must be specified as either cachepolicy=d or cachepolicy=c.
Table 8-2. Syntax For Name=Value Pairs For Parameters (continued)
Syntax Description