Release Notes

file:///T|/htdocs/SOFTWARE/svradmin/5.1/en/readme/readme_sa.txt[10/23/2012 1:31:47 PM]
"srvadmin-services.sh restart" or
"omconfig system webserver action=restart"
from the command line. You must refresh the web interface and log
back into Server Administrator to continue.
======================================================================
ISSUES FOR STORAGE MANAGEMENT SERVICE
======================================================================
The following are open issues regarding the Storage Management
Service.
----------------------------------------------------------------------
STORAGE MANAGEMENT SERVICE ISSUES FOR ALL SUPPORTED OPERATING SYSTEMS
----------------------------------------------------------------------
* When issuing certain "omconfig storage" CLI commands with "Power
User" privileges, the message "Error! User has insufficient
privileges to run command: omconfig" may be displayed. You must be
logged in as an Administrator to perform these actions.
* On a Windows Server 2003 system, it is strongly recommended that you
update to Service Pack 1 or later. Service Pack 1 is required to
fully support SAS technology.
* On a Windows 2000 system, it is strongly recommended that you update
to Service Pack 4 or later. Service Pack 4 is required to
fully support SAS technology.
* On a Red Hat Enterprise Linux 3.x system, Update 3 or later is
required for Storage Management and Update 7 or later is required to
fully support SAS technology. Dell strongly recommends that you use
the Red Hat Network (RHN) service to update your system software with
the latest update package before deploying your system. Go to
www.redhat.com to access the RHN service and download updates.
* Invalid "Format and Check Consistency" options are displayed
for a regenerating virtual disk. When a physical disk in a virtual
disk is rebuilding, the virtual disk changes to a "Regenerating"
state. The Format and Check Consistency operations should not
be performed on a virtual disk that is in a Regenerating state.
However, the task drop-down menu for a Regenerating
RAID 1-concatenated virtual disk may display the "Format and
Check Consistency" options. Dell is working to resolve this
problem.
* If a physical disk in a RAID 1-concatenated virtual disk fails,
the virtual disk is in a "Degraded" state. Rebooting the system
may cause the virtual disk to change to a "Failed" state yet the
virtual disk is still fully operational and can be restored to
"OK" status once a functional physical disk is added back to the
RAID-1 set. Dell is working to resolve this problem.