Messages Reference Guide

Storage Management Message Reference 65
2150 Bad block extended
medium error
Warning /
Non-critical
Cause: A portion of an array disk is damaged.
Action: See the online help for more
information.
753 691
2151 Asset tag changed Ok /
Normal
Cause: A user has changed the enclosure
asset tag. This alert is provided as an
information.
Action: None
851 None
2152 Asset name changed Ok /
Normal
Cause: A user has changed the enclosure
asset name. This alert is provided for
informational purposes.
Action: None
851 None
2153 Service tag changed Warning /
Non-critical
Cause: An enclosure service tag was changed.
In most circumstances, this service tag
should only be changed by Dell support or
your service provider.
Action: Ensure that the tag was changed
under authorized circumstances.
753 None
2154 Maximum
temperature probe
warning threshold
value changed
Ok /
Normal
Cause: A user has changed the value for the
maximum temperature probe warning
threshold. This alert is provided for
informational purposes.
Action: None
1051 None
2155 Minimum
temperature probe
warning threshold
value changed
Ok /
Normal
Cause: A user has changed the value for the
minimum temperature probe warning
threshold. This alert is provided for
informational purposes.
Action: None
1051 None
2156 Controller alarm has
been tested
Ok /
Normal
Cause: The controller alarm test has run
successfully. This alert is provided for
informational purposes.
Action: None
751 None
Table 4-1. Storage Management Messages (continued)
Event ID Description Severity Cause and Action SNMP Trap
Numbers
Array
Manager
Event
Number