Messages Reference Guide
Table Of Contents
- Dell OpenManage™ Server Administrator
- Messages Reference Guide
- Introduction
- Event Message Reference
- Miscellaneous Messages
- Temperature Sensor Messages
- Cooling Device Messages
- Voltage Sensor Messages
- Current Sensor Messages
- Chassis Intrusion Messages
- Redundancy Unit Messages
- Power Supply Messages
- Memory Device Messages
- Fan Enclosure Messages
- AC Power Cord Messages
- Hardware Log Sensor Messages
- Processor Sensor Messages
- Pluggable Device Messages
- System Event Log Messages for IPMI Systems
- Storage Management Message Reference
- Index
- Messages Reference Guide

20 Event Message Reference
Voltage Sensor Messages
Voltage sensors listed in Table 2-4 monitor the number of volts across critical components. Voltage sensor
messages provide status and warning information for voltage sensors in a particular chassis.
1105 Fan sensor detected a
non-recoverable value
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
Fan sensor value:
<Reading>
Error A fan sensor detected an error
from which it cannot recover.
The sensor location, chassis
location, previous state, and fan
sensor value are provided.
Table 2-4. Voltage Sensor Messages
Event ID Description Severity Cause
1150 Voltage sensor has failed
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
If sensor type is not discrete:
Voltage sensor value (in Volts):
<Reading>
If sensor type is discrete:
Discrete voltage state:
<State>
Information A voltage sensor in the specified
system failed. The sensor
location, chassis location,
previous state, and voltage
sensor value are provided.
1151 Voltage sensor value unknown
Sensor location:
<Location in chassis>
Chassis location:
<Name of chassis>
Previous state was:
<State>
If sensor type is not discrete:
Voltage sensor value (in Volts):
<Reading>
If sensor type is discrete:
Discrete voltage state:
<State>
Information A voltage sensor in the specified
system could not obtain a
reading. The sensor location,
chassis location, previous state,
and a nominal voltage sensor
value are provided.
Table 2-3. Cooling Device Messages (continued)
Event ID Description Severity Cause