CIM Reference Guide

CIM_LogicalElement 65
CIM_ExtraCapacityGroup
The CIM_ExtraCapacityGroup class explained in Table 3-39 applies to systems that have more
capability and components than are required for normal operation, for example, systems that have
extra fans or power supplies.
RedundancyStatus Provides information on the state of the redundancy group.
Values for the RedundancyStatus property are as follows:
0 Unknown
1 Other
2 Fully redundant. Fully redundant means that all of the
configured redundancy is still available.
3 Degraded redundancy. Degraded redundancy means that
some failures have been experienced but some reduced
amount of redundancy is still available.
4 Redundancy lost. Redundancy lost means that a sufficient
number of failures have occurred so that no redundancy is
available and the next failure experienced will cause
overall failure.
uint16
Table 3-39. CIM_ExtraCapacityGroup Properties
Class Name: CIM_ExtraCapacityGroup
Parent Class: CIM_RedundancyGroup
Property Description Data Type
MinNumberNeeded Specifies the smallest number of elements that must be
operational in order to have redundancy. For example, in
an N+1 redundancy relationship, the MinNumberNeeded
property should be set to N.
uint32
Table 3-38. CIM_RedundancyGroup Properties (continued)
Class Name: CIM_RedundancyGroup
Parent Class: CIM_LogicalElement
Property Description Data Type
CIM_ManagedSystemElement
CIM_LogicalElement
CIM_RedundancyGroup
CIM_ExtraCapacityGroup