CLI Guide

Table 63. Valid Parameters Of Omconfig Preferences Logging (continued)
name=value pair 1 name=value pair 2 Description
NOTE: The OS logging filter command
is applicable when the OS logging
filter component is installed.
attribute=archiveesmlog setting=Enable|Disable
Enabling the command allows you to
create an automatic backup of ESM Logs.
After the backup is created, ESM logs
of the Server Administrator and the SEL
entries of iDRAC/BMC are cleared. The
process is repeated whenever the logs are
full.
The backup files are:
Windows:
<Install_root>\omsa\log\omsellog.xml
Linux and ESXi: <Install_root>/var/log/
openmanage/omsellog.xml
NOTE: This command is applicable
only on YX0X and YX1X generation of
PowerEdge servers. On Dell’s YX2X
generation of PowerEdge servers and
later, iDRAC provides capability of
automatic clear of log entries and file
backup. Only latest version of the
backup XML file is available in the
mentioned locations.
attribute=logallsensors setting=Enable|Disable Enabling the command allows you to log
all unmonitored ESM sensor events in
to Alert log, OS log, and generates the
SNMP traps.
attribute=produselog setting=Enable|Disable Enabling the command tracks actions
performed on the Server Administrator.
The maximum size of the logfile is 50 MB.
An example command set only to remove the critical severities is as follows:
omconfig preferences logging attribute=oslogfilter logcrit=false
An example command set to enable the automatic backup of ESM logs.
omconfig preferences logging attribute=archiveesmlog setting=Enable
An example command set to enable the Log All ESM Sensor Events.
omconfig preferences logging attribute=logallsensors setting=Enable
An example command to set the Product Use Feedback.
omconfig preferences logging attribute=produselog setting=Enable logsize=4
Omconfig preferences webserver
Use the omconfig preferences webserver command to set the encryption levels of the Server Administrator web server,
configure the URL launch point in the Server Administrator web server environment, and to set the JRE version for the Server
Administrator.
The following table displays the name=value pairs you can use with this command:
Omconfig Managing Components Using The Instrumentation Service
93