CLI Guide

Table Of Contents
Omreport System Recovery Or Omreport Servermodule Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is an
action configured for a hung operating system. You can also view the number of seconds that must elapse before an operating
system is considered hung.
Omreport System Shutdown Or Omreport Servermodule Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending
shutdown actions for the system. If properties for shutdown are configured, executing this command displays these properties.
Omreport System Summary Or Omreport Servermodule Summary
Use the omreport system summary or omreport servermodule summarycommand to view a comprehensive
summary of software and hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server Administrator
displays the USC version.
The output that is displayed in the CLI window depends on the systems management software, operating system, and hardware
components and options installed on the system. The following partial command results are unique and may not resemble the
hardware and software configuration of the system:
Table 37. Command results
System Summary
-----------------
Software Profile
-----------------
Systems Management
Name : Dell OpenManage Systems Management
Software (64Bit)
Version : x.x.x
Description : Systems Management Software
Contains Apache Tomcat Webserver x.x.x
: Common Storage Module x.x.x
: Data Engine x.x.x
: Hardware Application Programming Interface
x.x.x
: Instrumentation Servicex.x.x
: Instrumentation Service Integration Layer
x.x.x
Intel SNMP Agent x.x.x
48 omreport Viewing System Status Using The Instrumentation Service