CLI Guide

Table Of Contents
that less than 80 percent of the space allotted for the ESM log is occupied by messages. If 80 percent or more of the allotted
space for the ESM log is occupied, the following caution is displayed:
Health: Non-Critical
If a caution is displayed, resolve all warning and critical severity conditions, and then clear the log.
Omreport System Alertaction Or Omreport Servermodule
Alertaction
Use the omreport system alertaction or omreport servermodule alertaction command to view a summary
of alert actions that have been configured for warning and failure events on the system components. Alert actions determine
how Server Administrator responds when a component has a warning or failure event.
The omreport system alertaction or omreport servermodule alertaction command is useful for viewing
which alert actions have been specified for components. To set an alert action for a component, use the omconfig system
alertaction or omconfig servermodule alertaction command. For more information, see omconfig: Managing
Components Using The Instrumentation Service.
NOTE: To maintain consistency across the commands, the output format of this command has changed. Change the user
scripts as applicable.
Components and events having view alert actions
View alert action properties for the following components and events, if the components or events are present on the system:
Battery Warning
Battery Failure
Chassis Intrusion
Current Probe Warning
Current Probe Failure
Fan Warning
Fan Failure
Memory Pre-failure
Memory Failure
System Power Probe Warning
System Power Probe Detects a Failure
System Peak Power
Power Supply Warning
Power Supply Failure
Degraded Redundancy
Lost Redundancy
Temperature Warning
Temperature Failure
Voltage Warning
Voltage Failure
Processor Warning
Processor Failure
Hardware Log Warning
Hardware Log Full
Watchdog Asr
Storage System Warning
Storage System Failure
Storage Controller Warning
Storage Controller Failure
Physical Disk Warning
Physical Disk Failure
Virtual Disk Warning
omreport Viewing System Status Using The Instrumentation Service
43