CLI Guide

If you specify the index, Server Administrator displays the Team interface details for the specific NIC and the values for the
following fields: Team Interface, Interface, IPv4 Addresses, IPv6 Addresses , Team Interface Receive
Statistics , Team Interface Transmit Statistics , Interface Receive Statistics, and Interface
Transmit Statistics.
Omreport Chassis Ports Or omreport Mainsystem Ports
Use the omreport chassis ports or omreport mainsystem ports command to view properties of the system’s
parallel and serial ports.
NOTE: CMC USB ports attached with blade servers are not enumerated by OMSA.
Server Administrator displays values for the following fields: Port Type, External Name, Base I/O Address, IRQ
Level, Connector Type, and Maximum Speed. The following table provides the description of the fields:
Table 23. Fields and Description
Field Description
Port Type Detailed type of each system port, from the more general serial, parallel, and USB ports to the names of ports
by device type connected to it, for example, pointing device or keyboard.
External
Name
Name of the port, such as serial or parallel, USB, mouse, keyboard, and so on.
Base I/O
Address
Starting I/O address expressed in hexadecimal.
IRQ Level Hardware interrupt on a system. The hardware interrupt signals the system's CPU that an event has started
or ended in a peripheral component such as a modem or printer. When communicated over a peripheral
component interconnect card, the IRQ level is a standard way to identify the type of device that is sending the
interrupt request.
Connector
Type
Type of plug or cable and plug that connects two devices together, in this case, the type of connector
that attaches an external device to a system. There are many connector types, each designed to connect a
different device type to a system. Examples include DB-9 Male, AT, Access Bus, PS/2, and so on.
Maximum
Speed
Port speed. Port speed refers to the data transmission rate of an input/output channel, measured in numbers
of bits per second. Serial ports usually have a maximum speed of 115 Kbps and USB version 1.x ports have a
maximum speed of 12 Kbps.
Omreport Chassis Processors Or Omreport Mainsystem Processors
Use the omreport chassis processors or omreport mainsystem processors command to view properties of the
system’s processors.
Server Administrator displays values for the following fields: Index, Status, Connector Name, Processor Brand,
Processor Version, Current Speed, State, and Core Count.
The following table provides the description of the fields.
Table 24. Fields and Description
Field Description
Index Processor number
Status Current status of the processor.
Connector Name Name or number of the device that occupies the processor slot in the system.
Processor Brand Type of processor made by a manufacturer such as Intel Itanium, Intel Pentium III, Intel Xeon, or AMD
Opteron.
Processor Version Model and stepping number of the processor.
Current Speed Actual processor speed in MHz at system boot time.
omreport Viewing System Status Using The Instrumentation Service 33