CLI Guide

Table 17. Output (continued)
Health : Ok
Index : 1
Status : OK
Probe Name : Drive Bay
State : Bay is open
Omreport Chassis Leds Or Omreport Mainsystem Leds
Use the omreport chassis leds or omreport mainsystem leds command to find out whether clear hard drive fault
is supported and what severity level lights up the LED. Type:
omreport chassis leds index=n
or
omreport mainsystem leds index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary of LED information
for chassis 0. If you specify the index, Server Administrator displays a summary for a specific chassis.
The following is an example output:
Table 18. Output
Main System Chassis
Flash chassis identify LED state : Off
Flash chassis identify LED timeout value : 300
Omreport Chassis Memory Or Omreport Mainsystem Memory
Use the omreport chassis memory or omreport mainsystem memory to view details for each memory module slot
in the system. If the system supports redundant memory, this command also displays the status, state, and type of memory
redundancy implemented on the system. Type:
omreport chassis memory index=n
or
omreport mainsystem index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays information for all memory
modules on the system as follows:
The following is an example output:
Table 19. Output
Memory Information
Health : Ok
Attributes of Memory Array(s)
Location : System Board or Motherboard
Use : System memory
omreport Viewing System Status Using The Instrumentation Service 29